WATER AND FISH

The hose was put into the bottom of the pool and switched on, nothing left to do but wait, watch and adjust the liner as the pool filled up by loosing off the G clamps and pulling/releasing the liner.  After two days the pool was full.  Filter bomb's were put in the filters and everything switched on and for the next two weeks the filters/pumps ect did there work.



After two weeks of running, water tests were carried out and with all parameters correct, the fish were netted from their temporary pool (nearly 12 months) and introduced to their new home.


They all seemed to be enjoying their new home settling in over the next week or so.


Comments

Post a Comment

Popular posts from this blog

Image
 AN ODE TO DIGGING A descision was made to leave the koi in the existing pond as long as possible and dig round the existing pond.  Can I start by saying I am not a builder or bricklayer so please do not look too closely at the blockwork etc.  The construction of the pool would be done in 8 stages. 1 digging and blockwork at rear and side of pool. 2 removal of exiting liner and removal of earth bank at rear of pool. 3 digging out existing pool to size of new pool 4 laying bottom drains 5 Blockwork at this end of pool 6 filter bay construction 7 installing filters pumps & UV's 8     installing underfelt and new liner Digging started at the rear of the pool where there was an existing concrete path (behind red bridge)and all the soil was removed from the rear of the pool to this depth being shovelled out into barrow and spread across the existing flower beds and boarders around the garden. When once the ground was all level with the path, a trench was dug for ...
Read more
Image
 THE TIMBER WORKS To finish the pool off, I had decided to cover it with a Japanese style pergola.  It was to be constructed out of 4 x 2 tanalised C24 construction timber (planed with rounded edges) Brackets were made to fix the uprights to the timbers on the top edge of the pool so six uprights were cut for each side.  These were painted bright red with Sandtex exterior paint and screwed in position. Next horizontal top rails were made which were painted balck and fixed to the uprights about 6" down.  The ends had been shaped and the other ends were tied into an existing summer house and sheds using truss hangers..  Finally logditudinal horizontals were pained and fitted to both the uprights and the cross beams. Due to the pool being in a position where it was exposed to full sun all day,  I layed scaffold debris netting across the top of the cross beams and fixed it in position with wooden strips.  Due to having young grandhildren, I decided I had t...
Read more